How To Change A Brake Light? – 4 Steps Quickly Read It
Russell Franklin - October 10, 2022Your main concern should be getting to your destination safely and without any mishaps, as you drive on the roads and highways. There are other options besides following traffic regulations and driving carefully to accomplish this. Maintaining your car and making sure it runs properly are important. Even something as basic as a tail light demonstrates this. If one or both of these lights are out, other drivers won’t be able to see your car as easily when it gets dark or it’s bad outside. Although replacing tail light bulbs is important, it doesn’t have to be difficult.
Tools You Will Need To Replace Your Brake Light
- Vehicle-specific brake light replacement bulb
- Screwdriver
- Ratchet
- Safety goggles
- Gloves
- Bulb grease
How To Change A Brake Light?
1. Identify The Faulty Light
- While you stand behind the car and check the brake lights, have someone sit in the car and repeatedly press and release the brake pedal.
- Identify the burned-out brake light bulb by looking under the taillight lens cover. Under each lens, there may be several bulbs, but only one of those is the brake light. When looking for the right replacement bulb later, knowing where the brake lightbulb is located under the lens might be helpful.
2. Find And Remove The Brake Lightbulb
All tail light bulbs can typically be accessed from inside the trunk of modern cars.
- Look directly behind the tail light lens where the broken bulb is by opening the trunk. Each tail light bulb’s wires and plastic base are visible there.
- Find the brake light bulb in the housing using your headlamp or flashlight.
- Pull the bulb holder and bulb into the trunk after counterclockwise turning the brake light holder to release it.
- From the holder, remove the lightbulb.
3. Acquire New Brake Lightbulb
The burned-out brake lightbulb doesn’t necessarily need to be brought with you when you shop, but having it on hand makes sure you get the right replacement bulb.
- Search for the appropriate brake lightbulb for your vehicle’s make and model at an online retailer. Automotive bulbs are available on Amazon in a large selection, and you can enter information about your car to make sure the bulb will fit.
- Alternatively, bring your old bulb to an auto parts supplier.
- A spare bulb should be kept in your glove box if you decide to purchase two. The other brake light will likely fail shortly if the first one has.
4. Install And Test The New Bulb
- Fill the holder with the new bulb.
- To lock the holder in place, turn it clockwise after inserting the holder and bulb into the tail light assembly.
- Make sure the bulb and holder in the tail light assembly are firmly in place.
- While you check the rear lights, have someone sit in the driver’s seat and operate the brake pedal.
Important Brake Light Replacement Tips To Remember
- Ensure the tail lights work – Turn on your lights to check that the tail light you just replaced is functioning properly before putting everything away. If not, you might need to unplug the battery before checking the assembly or the vehicle again to make sure the bulb fits.
- Select the right bulbs – All brake light replacement bulbs were not created equally. Therefore, look for fitting information on the old bulb’s base. In order to find the right bulb for your car, look through AutoZone’s inventory next. Start looking at our selection of tail light bulbs to find the ideal one for your car.
- Newer vehicles could take a bit longer – It might be a little trickier, but not impossible, to replace the tail lights on more recent cars. Make sure you have those tools on hand in case there are any additional wires to be disconnected.
- Routinely check your tail lights – Plan to check your tail lights frequently once the replacement of your brake lights is complete. It’s difficult to tell if your tail lights are functioning properly because of where they are located. Set a date on your calendar each month to check that your headlights and taillights are working. Broken tail lights are not just illegal on the road; they can also cause a collision with another vehicle. Therefore, make checking your tail lights a regular and routine inspection.
Categories
Tag
10 speed bike 26 inch bike for what size person adjusting bike brakes average bike speed best mini bike bicycle Bike Bike Brakes Bike Chain Bike Cost Bike Frame Bike Pump Biker Shorts Bike Seat Bike Tire Bike Tire Pressure bike tire valves bike tricks Bike Wheel Camelbak cycling dirt bike dutch bikes how fast can a bike go how to ship a bike How To Take Off Bike Pedals how to tighten bike brakes how to use bike pump Kid Mountain Bike Paint A Bike Peloton Bike pit bike Pump A Bike Tire Remove Bike Pedals slope bike Sticky Piston tesla bike truing a bike wheel tubeless bike tires types of bike brakes walking bike what muscles does a bike work winter bike youth dirt bike helmets